Command
Modes
CONFIGURATION
Command
History Version Description
9.7(0.0) Introduced on the Z9500.
Usage
Information
The dcb-map linecard all backplane all command overwrites any
previous DCB maps applied to backplane
dcb-policy buffer-threshold sfm all port-set all backplane all
Assign the DCB policy to all sfm and backplane ports interfaces. This setting takes precedence over the
global buffer-threshold interface configuration.
Syntax dcb-policy buffer-threshold sfm all port-set all backplane all
<dcb-policy-name>
Parameters buffer-
threshold Configure the profile name for the DCB buffer threshold
Defaults None.
Command
Modes
GLOBAL CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500.
Usage
Information You can configure dcb-policy on all sfm and backplane ports and assign dcb-
policy to the backplane ports.
Example dcb-policy buffer-threshold sfm all backplane all test
Data Center Bridging (DCB) 629