Example (SFM
HiGig Port) Dell# show hardware sfm 5 hg-stats port 19
Higig Port Statistics:
HiGigabitEthernet 3/5/19,
Input Statistics:
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
byte pkts
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
63970532045 packets, 5117642582960 bytes 0 underruns
0 64-byte pkts, 63970531981 over 64-byte pkts, 0 over 127-
byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
byte pkts
0 Multicasts, 0 Broadcasts 63970532058 Unicasts
0 throttles, 0 discarded, 0 collisions 0 wredDrops
Rate info (interval 15 seconds):
Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of
line-rate
Output 37096.40 Mbits/sec, 57963128 packets/sec, 94.88%
of line-rate
Related
Commands
clear hardware hg-stats — clears traffic statistics from internal ports in a HiGig link
bundle.
show hg-link-bundle-distribution
Display the operational status and link utilization in a HiGig link bundle.
Z9500
Syntax show hg-link-bundle-distribution {sfm npu-id hg-port—channel
hg-port—channel-id | slot slot npuUnit npu-id hg-port—channel
0} enable
Parameters sfm npu-id hg-
port-channel
hg-port-
channel-id
Specify a HiGig port channel on a Z9500 SFM (spine) NPU by
entering the keyword sfm and SFM NPU ID, then hg-port-
channel and a HiGig port channel ID. SFM NPU IDs are 0 to
5; SFM HiGig port-channel IDs are 0 to 10.
slot slot-id
npuUnit npu-id
hg-port-
channel 0
Specify a HiGig port channel on a Z9500 line-card (leaf) NPU
by entering the keyword slot and slot number, then
npuUnit and NPU ID, then hg-port-channel 0. Line-card
slot numbers are 0 to 2; line-card NPU IDs are 0 to 3. The
HiGig port-channel ID is always 0 because there is only one
HiGig link bundle used on a line-card NPU to connect to
SFM NPUs.
Command
Modes EXEC, EXEC Privilege
Interfaces 909