interface vlan
Configure a VLAN. You can configure up to 4094 VLANs.
Z9500
Syntax interface vlan vlan-id
Parameters vlan-id Enter a number as the VLAN Identifier. The range is 1 to
4094.
Defaults Not configured, except for the Default VLAN, which is configured as VLAN 1.
Command
Modes
CONFIGURATION
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
9.0(1.3) Introduced on the S5000.
Usage
Information For more information about VLANs and the commands to configure them, refer to
the Virtual LAN (VLAN) Commands section of the Layer 2 chapter.
FTP, TFTP, and SNMP operations are not supported on a VLAN. MAC ACLs are not
supported in VLANs. IP ACLs are supported. For more information, refer to the
Access Control Lists (ACL) chapter.
Example (Single
Range) Dell(conf)#int vlan 3
Dell(conf-if-vl-3)#
Related
Commands interface – configures a physical interface.
interface loopback – configures a loopback interface.
interface null – configures a null interface.
interface port-channel – configures a port channel group.
show vlan – displays the current VLAN configuration on the switch.
shutdown – disables/enables the VLAN.
tagged – adds a Layer 2 interface to a VLAN as a tagged interface.
untagged – adds a Layer 2 interface to a VLAN as an untagged interface.
852 Interfaces