show config
Display the global GVRP configuration.
Z9500
Syntax show config
Command
Modes
CONFIGURATION-GVRP
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related
Commands gvrp enable — enables GVRP on physical interfaces and LAGs.
protocol gvrp — accesses the GVRP protocol.
show garp timers
Display the GARP timer settings for sending GARP messages.
Z9500
Syntax show garp timers
Defaults none
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
800 GARP VLAN Registration (GVRP)