Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
host
For manual (rather than automatic) configurations, assign a host to a single-address pool.
Z9500
Syntax host address
Parameters address/mask Enter the host IP address and subnet mask.
Defaults none
Command
Modes
DHCP <POOL>
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
ip address dhcp
Configure an interface to receive its IP address from the configured DHCP server.
Z9500
Syntax ip address dhcp
To release the IP address acquired from a DHCP server, enter the no ip address
dhcp command.
Dynamic Host Configuration Protocol (DHCP) 711