Related
Commands ip access-list extended cpu-qos — creates an extended IP ACL for CoPP.
mac access-list extended cpu-qos — creates an extended MAC ACL for CoPP.
class-map cpu-qos — creates a QoS class map for CoPP.
qos-policy-input cpu-qos — creates a QoS input-policy map for CoPP.
policy-map-input cpu-qos — creates an input-policy map for CoPP.
show control-traffic protocol
Display per-protocol counters of rate-limited control-plane traffic.
Z9500
Syntax show contol—traffic protocol [cp—switch | linecard slot-id
portset port-pipe] counters
Parameters cp-switch Enter the keyword cp-switch to display counters for rate-
limited traffic on the central switch (aggregated CoPP).
linecard slot-id
portset port-
pipe
Enter the slot ID and port pipe to display counters for rate-
limited traffic on a specified Z9500 line card and port set.
The range of Z9500 slot IDs is from 0 to 2. The range of
port-pipe numbers is: 0 to 2 on line card 0; 0 to 3 on line
cards 1 and 2.
Defaults None
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
Usage
Information There are three line cards (0-2) with fixed ports on the Z9500. Line card 0 uses
three sets of ports (port pipes): 0 to 2; line cards 1 and 2 use four sets of ports: 0 to
3.
In the show control-traffic protocol output, RxBytes displays the number
of bytes of control-plane traffic received on which protocol-based rate limiting is
594 Control Plane Policing (CoPP)