• Queues 8 to 15 process packets destined to the Route
Processor CPU.
• Queues 16 to 23 process packets destined to the line
card CPU.
Defaults Clear per-queue rate-limiting counters for all control-plane and port traffic.
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Usage
Information To display the per-queue counters of rate-limited control-plane traffic at the
aggregated (switch) or line card and port set level, use the show control-
traffic queue command.
Example Dell#clear control-traffic queue 2 counters
Dell#
control-plane-cpuqos
To manage control-plane traffic, enter control-plane mode and configure the switch.
Z9500
Syntax control-plane-cpuqos
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control Plane Policing (CoPP) 591