Application Priority TLV Parameters :
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x8
Local ISCSI PriorityMap is 0x10
Remote FCOE PriorityMap is 0x8
Remote ISCSI PriorityMap is 0x8
0 Input TLV pkts, 1 Output TLV pkts, 0 Error pkts,
0 Pause Tx pkts, 0 Pause Rx pkts
show interface pfc statistics
Displays counters for the PFC frames received and transmitted (by dot1p priority class) on an interface.
Syntax show interface port-type slot/port pfc statistics
Parameters port-type Enter the port type.
slot/port Enter the slot/port number.
Command
Modes
INTERFACE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500.
Example
(Summary) Dell (conf-if-te-0/1)#show int te 0/1 pfc statistics
Interface TenGigabitEthernet 0/1
Priority Rx XOFF Frames Rx Total
Frames Tx Total Frames
---------------------------------------------------------------
-----------------------
-
0 0
0 0
1 0
0 0
2 0
0 0
3 0
0 0
4 0
0 0
5 0
0 0
6 0
0 0
7 0
0 0
Data Center Bridging (DCB) 613