Defaults •external-distance = 20
•internal-distance = 200
•local-distance = 200
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information CAUTION: Dell Networking recommends that you do not change the
administrative distance of internal routes. Changing the administrative
distances may cause routing table inconsistencies.
The higher the administrative distance assigned to a route means that your
confidence in that route is low. Routes assigned an administrative distance of 255
are not installed in the routing table.
Routes from confederations are treated as internal BGP routes.
ipv6 prefix-list
Configure an IPv6 prefix list.
Z9500
Syntax ipv6 prefix-list prefix-list name
Parameters prefix-list name Enter the name of the prefix list.
NOTE: There is a 140-character limit for prefix list
names.
Defaults none
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Border Gateway Protocol 535