Dell 9.8(0.0) - page 1537

description
Enter a description of the RIP routing protocol.
Z9500
Syntax description {description}
To remove the description, use the no description {description}
command.
Parameters description Enter a description to identify the RIP protocol (80
characters maximum).
Defaults none
Command
Modes
ROUTER RIP
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.7.1.0 Introduced on the E-Series.
Related
Commands
router rip — enters ROUTER mode on the switch.
Routing Information Protocol (RIP) 1537