Dell 9.8(0.0) Buffer Tuning Commands

NO NO NO
portcardBoardRevisionTest: ALL RUN YES NO
NO NO NO
portcardHiGigLinkStatusTest: ALL RUN NO YES
NO NO NO
portcardIxiaTrafficCmd: ALL RUN NO NO
NO NO YES
portcardPortStats: ALL RUN NO NO
NO NO YES
portcardXELinkStatusTest: ALL RUN NO YES
NO NO NO
qsfpOpticsTest: ALL RUN YES YES
NO NO NO
qsfpPhyTest: ALL RUN YES YES
NO NO NO
qsfpPresenceTest: ALL RUN NO YES
NO NO NO
qsfpReadInterruptTest: ALL RUN NO NO
NO NO YES
qsfpReadModeTest: ALL RUN NO NO
NO NO YES
rtcTest: ALL RUN YES YES
NO NO NO
sataSsdTest: ALL RUN YES YES
NO NO NO
temperatureTest: ALL RUN YES NO
NO NO NO
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced the verbose option.
Version 7.7.1.0 Introduced on the S-Series.
Buffer Tuning Commands
This section describes the buffer tuning commands supported on the switch.
WARNING: Reconfiguring the buffer allocations is a sensitive operation. Do not use any buffer
tuning command without first contacting the Dell Networking Technical Assistance Center (TAC).
660 Debugging and Diagnostics