Dell 9.8(0.0) - page 1243

Version Description
6.2.1.1 Introduced on the E-Series.
Usage
Information
For two MSTP switches to be within the same MST region, the switches must share
the same revision number.
Related
Commands msti — maps the VLAN(s) to an MST instance.
name — assigns the region name to the MST region.
show config
View the current configuration for the mode. Only non-default values are shown.
Z9500
Syntax show config
Command
Modes
MULTIPLE SPANNING TREE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Introduced on the E-Series.
Example Dell(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
Multiple Spanning Tree Protocol (MSTP) 1243