DATA=0x00000004
MASK=0x0000000c
L3Routable
Offset: 166 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 195 Width: 7
DATA=0x00000001
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics=NULL
EID 0x0000130d: gid=0xd,
slice=0, slice_idx=0x1, part =0 prio=0x130d,
flags=0x10202, Installed, Enabled
tcam: color_indep=0,
StageEgress
slice=1, slice_idx=0x1, part =1 prio=0x130d,
flags=0x10204, Installed, Enabled
tcam: color_indep=0,
IpType
Offset: 208 Width: 5
DATA=0x00000004
MASK=0x0000000c
L3Routable
Offset: 166 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 195 Width: 7
DATA=0x00000001
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics={stat id 110 slice = 0 idx=4 entries=1}
{Packets}
Usage
Information
The port-set values are internal port numbers. For a cross reference of the internal
and port numbers, refer to the Debugging and Diagnostics chapter in the Dell
Networking OS Configuration Guide for the Z9500 System.
show hardware layer2
Display information about the Layer 2 ACLs used on a Z9500 line card and port pipe.
Z9500
Syntax show hardware layer2 {eg-acl | in-acl} linecard slot-id port-
set number
Parameters eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to
display ingress or egress ACL data.
690 Debugging and Diagnostics