Command
Modes
CONFIGURATION-VRF
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OSCommand Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4(0.0) Introduced on the S–Series.
Usage
Information If the maximum route limit is not specified for a VRF, then it has unlimited space
that extends to the maximum number of entries allowed for the system. This
command is not applicable to the default and management VRFs.
show ip vrf
Displays information corresponding to the VRFs that are configured in the system.
Z9500
Syntax show ip [vrf vrf-name]
Parameters vrf vrf-name Enter the keyword vrf and then the name of the VRF to
display information corresponding to that VRF..
Command
Modes
EXEC
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0) Introduced on the Z9500.
Version 9.4.
(0.0)
Introduced on the S-Series and Z9000.
Version 8.2.1.0 Introduced on the E-Series.
Example show ip vrf
VRF-Name VRF-ID Interfaces
default 0 Te 0/0-13,18-47,
Fo 0/48,52,56,60,
Virtual Routing and Forwarding (VRF) 1847