Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Added support for the association of an IP address with a
multicast MAC address on the Z9500.
9.3(0.0) Added support for the association of an IP address with a
multicast MAC address on the S4810, S4820T, S6000, and
Z9000.
Usage
Information
For the multicast mode of NLB, use ARP to associate the IP address of a server
cluster with a multicast MAC address in the switch, by entering the arp ip-
address multicast-mac-address command.
Related
Commands clear arp-cache — clears dynamic ARP entries from the ARP table.
show arp — displays the ARP table.
ip vlan-flooding
Enable unicast data-traffic flooding on VLAN member ports.
Syntax ip vlan-flooding
To disable, use the no ip vlan-flooding command.
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Default Disabled
Usage
Information
By default this command is disabled. There might be some ARP table entries which
are resolved through ARP packets which had Ethernet MAC SA different from MAC
1202 Microsoft Network Load Balancing