flash://ADMIN_DIR/ssh/authorized-keys-username (where username is
the user associated with this terminal).
NOTE: The no form of this command deletes the file flash://ADMIN_DIR/
ssh/ authorized-keys-username file.
Related
Commands show ip ssh rsa-authentication — displays the RSA authorized keys.
ip ssh rsa-authentication (Config) — enables RSA authentication.
ip ssh server
Configure an SSH server. The SSH server is enabled by default.
Z9500
Syntax NOTE: Some of the parameters in this command require licensing to access.
For more information, contact your Dell Networking representative.
ip ssh server {ciphers cipher-list} {enable | port port-number}
[kex key-exchange-algorithm] [mac hmac-algorithm] [version {1 |
2}]
To disable SSH server functions, use the no ip ssh server {ciphers
cipher-list} {enable | port port-number} [kex key-exchange-
algorithm] [mac hmac-algorithm] [version {1 | 2}] command.
Parameters enable Enter the key word enable to start the SSH server.
ciphers cipher-
list
Enter the keyword ciphers and then a space-delimited list
of ciphers that the SSH server supports.
The following ciphers are available.
•3des-cbc
•aes128-cbc
•aes192-cbc
•aes256-cbc
•aes128-ctr
•aes192-ctr
•aes256-ctr
The default cipher list is used.
•3des-cbc
•aes128-cbc
•aes192-cbc
Security 1665