Version Description
8.3.11.1 Introduced on the Z9000.
isis password
Configure an authentication password for an interface.
Z9500
Syntax isis password [hmac-md5] password [level-1 | level-2]
To delete a password, use the no isis password [password] [level-1 |
level-2] command.
Parameters encryption-
type
(OPTIONAL) Enter 7 to encrypt the password using DES.
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the
password using MD5.
password Assign the interface authentication password.
level-1 (OPTIONAL) Independently configures the authentication
password for Level 1. The router acts as a station router for
Level 1 routing. This setting is the default.
level-2 (OPTIONAL) Independently configures the authentication
password for Level 2. The router acts as an area router for
Level 2 routing.
Defaults No default password. level-1 (if not otherwise specified).
Command
Modes
INTERFACE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
1092 Intermediate System to Intermediate System (IS-IS)