Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced on the E-Series.
Usage
Information
You cannot use Class D or Class E IP addresses or zero IP address (0.0.0.0) when
creating a static ARP. Zero MAC addresses (00:00:00:00:00:00) are also invalid.
Related
Commands clear arp-cache — clears dynamic ARP entries from the ARP table.
show arp — displays the ARP table.
arp backoff-time
Set the exponential timer for resending unresolved ARPs.
Z9500
Syntax arp backoff-time seconds
Parameters seconds Enter the number of seconds an ARP entry is black-holed.
The range is from 1 to 3600. The default is 30.
Defaults 30
Command
Mode
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
IPv4 Routing 925