Related
Commands •upgrade fpga-image system fpga booted — upgrades the FPGA devices in all
Z9500 CPUs.
upgrade fpga-image system cpld booted
Use this command to upgrade the CPLD devices in the Z9500 Route Processor and Control Processor
CPUs using the currently running Dell Networking operating-system image (and only when required by
the upgrade procedure in the Z9500 release notes).
Z9500
Syntax upgrade fpga-image system cpld booted
Defaults none
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z-Series.
8.3.1.0 Added the rpm option.
7.5.1.0 Introduced on the C-Series.
Example Dell# upgrade fpga-image system cpld booted
Current information in the system:
=================================
Card FPGA Name Current Version New Version
----------------------------------------------
CP SYSTEM CPLD 0x07 0x08
************************************************************
* Warning - Upgrading FPGA is inherently risky and should *
* only be attempted when necessary. A failure at this upgrade
may *
* cause a board RMA. Proceed with caution ! *
************************************************************
***********************************************************
* When the upgrade has successfully completed, the system will
be *
File Management 81