To disable debugging, use the no debug ip bgp ipv6 unicast ipv6-
address prefix-length updates [in | out] command.
Parameters ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
updates Enter the keyword updates to view BGP update
information.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP
updates sent to neighbors.
Defaults Disabled.
Command
Modes
EXEC Privilege
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
debug ip bgp notifications
Allows you to view information about BGP notifications received from neighbors.
Z9500
Syntax debug ip bgp [ipv6-address | peer-group peer-group-name]
notifications [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] notifications [in | out] command.
Parameters ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group
peer-group-
name
(OPTIONAL) Enter the keywords peer-group followed by
the name of the peer group.
Border Gateway Protocol 531