Version Description
7.4.1.0 Introduced
Usage
Information The software compares the MEDs only if the path contains no external
autonomous system numbers.
If you enable this command, use the clear ip bgp * command to recompute
the best path.
bgp bestpath med missing-as-best
During path selection, indicate preference to paths with missing MED (MULTI_EXIT_DISC) over those
paths with an advertised MED attribute.
Z9500
Syntax bgp bestpath med missing-as-best
To return to the default selection, use the no bgp bestpath med missing-as-
best command.
Defaults Disabled
Command
Modes
ROUTER BGP
Command
History Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage
Information
The MED is a 4-byte unsigned integer value and the default behavior is to assume a
missing MED as 4294967295. This command causes a missing MED to be treated
as 0. During the path selection, paths with a lower MED are preferred over those
with a higher MED.
bgp client-to-client reflection
Allows you to enable route reflection between clients in a cluster.
Z9500
Syntax bgp client-to-client reflection
To disable client-to-client reflection, use the no bgp client-to-client
reflection command.
508 Border Gateway Protocol