tracerouteView a packet’s path to a specific device.
Z9500
Syntax traceroute {host | vrf instance | ip-address | ipv6-address}
Parameters host Enter the name of device.
vrf instance (Optional) E-Series Only: Enter the keyword vrf then the
VRF Instance name.
ip-address Enter the IP address of the device in dotted decimal format.
ipv6-address Enter the IPv6 address, in the x:x:x:x::x format, to which you
are testing connectivity.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Defaults • Timeout = 5 seconds
• Probe count = 3
• 30 hops max
• 40 byte packet size
• UDP port = 33434
Command
Modes • EXEC
• EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Introduced on the E-Series ExaScale with IPv6.
8.1.1.0 Introduced on the E-Series ExaScale (IPv4 only).
7.9.1.0 Introduced VRF.
Control and Monitoring 183