dot1x tx-period
Configure the intervals at which EAPOL PDUs the Authenticator PAE transmits.
Z9500
Syntax dot1x tx-period seconds
To return to the default, use the no dot1x tx-period command.
Parameters seconds Enter the interval time, in seconds, that EAPOL PDUs are
transmitted. The range is from 1 to 65535. The default is 30.
Defaults 30 seconds
Command
Modes
INTERFACE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
show dot1x cos-mapping interface
Display the CoS priority-mapping table the RADIUS server provides and applies to authenticated
supplicants on an 802.1X-enabled system.
Z9500
Syntax show dot1x cos-mapping interface interface [mac-address mac-
address]
208 802.1X