Dell 9.8(0.0) PIM-Source Specific Mode (PIM-SSM)

38
PIM-Source Specific Mode (PIM-SSM)
The protocol-independent multicast source-specific mode (PIM-SSM) commands in this section are
supported in the Dell Networking operating system.
IPv4 PIM Commands
The following commands apply to IPv4 PIM-SM, IPv4 PIM-SSM, and PIM-DM.
•clear ip pim tib
•debug ip pim
•ip pim dr-priority
•ip pim neighbor-filter
•ip pim query-interval
•show ip pim interface
•show ip pim neighbor
•show ip pim tib
IPv4 PIM-Source Specific Mode Commands
The following IPv4 PIM-source specific mode (PIM-SSM) commands are supported:
•ip pim ssm-range
•show ip pim ssm-range
ip pim ssm-range
Specify the SSM group range using an access list.
Syntax ip pim [vrf vrf-name] ssm-range {access_list_name}
Parameters vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to specify the SSM group range for that VRF.
1418 PIM-Source Specific Mode (PIM-SSM)