buffer-profile (Configuration)
Create a buffer profile that can be applied to an interface.
Z9500
Syntax buffer-profile {fp | csf] profile-name {global {1Q | | 4q}
Parameters fp Enter the keyword fp to create a buffer profile for the Field
Processor.
csf Enter the keyword csf to create a buffer profile for the
Switch Fabric Processor.
profile-name Create a name for the buffer profile,
global Apply one of two pre-defined buffer profiles to all of the
port-pipes in the system.
1Q Enter the keyword 1Q to choose a pre-defined buffer profile
for single queue (for example, non-QoS) applications.
4Q Enter the keyword 4q to choose a pre-defined buffer profile
for four queue (for example, QoS) applications.
Defaults Dynamic
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
9.2(0.2) Changed the default value from global 4q to Dynamic.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
7.8.1.0 Added the global keyword.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
Usage
Information The buffer-profile global command fails if you have already applied a
custom buffer-profile on an interface. Similarly, when you configure buffer-
profile global, you cannot not apply buffer-profile on any interface.
Debugging and Diagnostics 661