Dell 9.8(0.0) ip telnet server enable

Command
History Version Description
9.5(0.1) Introduced on the Z9500.
9.3(0.1) Introduced on the S4810, S4820T, S6000, and Z9000.
8.3.11.1 Introduced on the Z9000
8.2.1.0 Increased number of VLANs on ExaScale to 4094 (was
2094)
8.1.1.0 Introduced on E-Series ExaScale
7.6.1.0 Support added for S-Series
7.5.1.0 Introduced on C-Series
ip telnet server enable
Enable the Telnet server on the switch.
Z9500
Syntax ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults Enabled
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Control and Monitoring 117