ip community-list
Enter COMMUNITY-LIST mode and create an IP community-list for BGP.
Z9500
Syntax ip community-list comm-list-name
To delete a community-list, use the no ip community-list comm-list-name
command.
Parameters comm-list-
name
Enter a text string as the name of the community-list, up to
140 characters.
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
6.1.1.0 Introduced on the E-Series.
Example Dell(conf)#ip community-list TestComList
Dell(config-community-list)#
show ip community-lists
Display configured IP community lists in alphabetic order.
Z9500
Syntax show ip community-lists [name]
Parameters name (OPTIONAL) Enter the name of the standard or extended IP
community list, up to 140 characters.
Access Control Lists (ACL) 335