Defaults level-1-2
Command
Modes
INTERFACE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage
Information Because the default establishes Level 1 and Level 2 adjacencies, you do not need to
configure this command. Routers in an IS-IS system must be configured as a Level
1-only, Level 1-2, or Level 2-only system.
Only configure interfaces as Level 1 or Level 2 on routers that are between areas
(for example, a Level 1-2 router) to prevent the software from sending unused hello
packets and wasting bandwidth.
isis csnp-interval
Configure the IS-IS complete sequence number PDU (CSNP) interval on an interface.
Z9500
Syntax isis csnp-interval seconds [level-1 | level-2]
To return to the default values, use the no isis csnp-interval [seconds]
[level-1 | level-2] command.
Parameters seconds Interval of transmission time between CSNPs on multi-
access networks for the designated intermediate system. The
range is from 0 to 65535. The default is 10.
level-1 (OPTIONAL) Independently configures the interval of time
between transmission of CSNPs for Level 1.
level-2 (OPTIONAL) Independently configures the interval of time
between transmission of CSNPs for Level 2.
Intermediate System to Intermediate System (IS-IS) 1085