The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
domain-name
Assign a domain to clients based on the address pool.
Z9500
Syntax domain-name name
Parameters name Give a name to the group of addresses in a pool.
Defaults none
Command
Modes
DHCP <POOL>
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
excluded-address
Prevent the server from leasing an address or range of addresses in the pool.
Z9500
Syntax excluded-address [address | low-address high-address]
Dynamic Host Configuration Protocol (DHCP) 709