Parameters enable Enter the keyword enable to enable hostbased-
authentication for SSHv2 server.
Defaults Disabled.
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information If you enable this command, clients can log in without a password prompt. This
command provides two levels of authentication:
• rhost-authentication is done with the file specified in the ip ssh rhostfile
command.
• checking client host-keys is done with the file specified in the ip ssh pub-
key-file command.
NOTE: Administrators must specify the two files (rhosts and pub-key-file)
to configure host-based authentication.
Related
Commands ip ssh pub-key-file — public keys of trusted hosts from a file.
ip ssh rhostsfile — trusted hosts and users for rhost authentication.
ip ssh key-size
Configure the size of the server-generated RSA SSHv1 key.
Z9500
Syntax ip ssh key-size 512-869
1658 Security