default-metric
Change the default metric for routes. To ensure that all redistributed routes use the same metric value,
use this command with the redistribute command.
Z9500
Syntax default-metric number
To return the default metric to the original values, use the no default-metric
command.
Parameters number Specify a number. The range is from 1 to 16. The default is 1.
Defaults 1
Command
Modes
ROUTER RIP
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage
Information
This command ensures that route information being redistributed is converted to
the same metric value.
Related
Commands
redistribute — allows you to redistribute routes learned by other methods.
1536 Routing Information Protocol (RIP)