Defaults None
Command
Modes
CONFIGURATION-UDF TCAM
Example Dell(conf-udf-tcam)# udf-qualifier-value ipnip_val1
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S6000, Z9500.
Related
Commands udf-id — assigns value for each configured UDF ID in the given UDF TCAM profile.
udf-tcam — creates a context for UDF TCAM.
show config — displays the current UDF-Qualifier-Value Profile configuration.
udf-tcam
Create a context for UDF TCAM.
Syntax udf-tcam name seq number
To return to the default settings, use the no udf-tcam name seq number
command.
Parameters name Enter the UDF ACL profile name, up to 64 characters.
number Enter the keyword seq then the sequence number of the
Udf-Tcam table. The range is from 1 to 512.
Defaults None
Command
Modes
CONFIGURATION
Example Dell(conf)#udf-tcam ipnip seq 1
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Access Control Lists (ACL) 343