Parameters weight Specify an administrative distance. The range is from 1 to
255. The default is 110.
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If
you enter a router ID, include the mask for that router
address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n
format.
access-list-
name
(OPTIONAL) Enter the name of an IP standard access list, up
to 140 characters.
Defaults 110
Command
Modes
ROUTER OSPF
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
distance ospf
Configure an OSPF distance metric for different types of routes.
Z9500
Syntax distance ospf [external dist3] [inter-area dist2] [intra-area
dist1]
To delete these settings, use the no distance ospf command.
Parameters external dist3 (OPTIONAL) Enter the keyword external then a number to
specify a distance for external type 5 and 7 routes. The range
is from 1 to 255. The default is 110.
Open Shortest Path First (OSPFv2 and OSPFv3) 1265