1.Select SNMP/Insight Manager Settings in the Administration tab of the iLO navigation frame to enable SNMP alerting and to provide an SNMP trap IP address to iLO. This IP address should be the address of the computer running Insight Manager 7. Refer to the "Enabling SNMP Alerts (on page 96)" section for details.
2.Configure iLO as a managed device for Insight Manager 7. Adding iLO to Insight Manager 7 enables the NIC interface on iLO to function as a dedicated management port, isolating management traffic from the remote host server NIC interface.
a.Start Insight Manager 7. Click Settings. By default, the Automatic Discovery screen is displayed. Use this screen to discover any iLO that will be managed by Insight Manager 7. If the IP address does not already appear in the Ping Inclusion Ranges section, enter the IP address.
b.Click Execute Discovery Now to add iLO to Insight Manager 7. The Status section displays the system being updated.
c.After the discovery is complete, subsequent queries will display the device as a management processor.
d.You might need to select Edit Device from the Discovery tab and edit the monitor community string (for example, by changing it to "public") so that iLO is displayed in the list of monitored devices.
e.iLO traps are displayed in a query for major, uncleared events. You can click the orange button at the top of the screen to issue this query. Click the event description to obtain further information about the event.
NOTE: HP Insight Agents for iLO must be installed on the remote host server to enable management of iLO. Refer to "Installing iLO Device Drivers (on page 24)" for additional details about installing and configuring agents.
Port Matching
Insight Manager 7 is configured to start an HTTP session to check for iLO at port
80.The port can be changed. If you want to change the port number, you must also change it in Network Settings and Insight Manager 7.