116 User Guide Integrated Lights-Out

The Terminal Services Pass-through service might experience start-up problems when the operating system Application Event Log is full. To view the event log, select Computer Management>System Tools>Event

Viewer>Application.

7.Verify that the Terminal Services port assignment is correct. Verify that the Terminal Services client, mstsc.exe is located in \WINDOWS\SYSTEM32.

If not, reconfigure the pass-through configuration to Enabled and manually activate the terminal services client.

HP ProLiant Essentials Rapid Deployment Pack Integration

HP ProLiant Essentials Rapid Deployment Pack integrates with iLO to allow the management of remote servers and the performance of remote console operations regardless of the state of the operating system or hardware.

The Deployment Server provides the ability to use the power management features of iLO to power on, power off, or cycle power on the target server. Each time a server connects to the Deployment Server, the Deployment Server polls the target server to see if a LOM management device is installed. If installed, the server gathers information including the DNS name, IP address, and first user name. Security is maintained by requiring the user to enter the correct password for that user name.

For more information about the ProLiant Essentials Rapid Deployment Pack, refer to the documentation that ships on the ProLiant Essentials Rapid Deployment Pack CD or the HP website (http://www.hp.com/servers/rdp).

Telnet Support

iLO supports the use of telnet to access the iLO command line interface. Telnet access to iLO supports the CLI, which can invoke a Remote Console connection as well as a Virtual Serial Port connection. Refer to the "Command Line Interface (on page 130)" section for more information.

Page 116
Image 116
HP Integrated Lights-Out manual HP ProLiant Essentials Rapid Deployment Pack Integration, Telnet Support, ViewerApplication