
132 User Guide Integrated Lights-Out
The following commands display help messages :
−help
−?
Entering help or ? displays all the supported commands. Entering <command help/?> or <help/? command> displays the help message specific to that command.
•Power
The power command is used to change the power state of the server and is limited to users with the Power and Reset privilege.
−power displays the current server power state
−power on turns the server on
−power off turns the server off
−power reset resets the server (server power off followed by server power on)
−power warm warm boots the server
•UID
The UID command is used to change the state of the
−uid displays the current
−uid on turns the
−uid off turns the
•NMI
The NMI command is used to generate and send an NMI to the server and is limited to users with the Power and Reset privilege.
•Remcons
The remcons command starts a Remote Console session and is limited to users with the Remote Console privilege. Only a text based remote console is supported, similar to a telnet session. When in Remote Console session, enter <ESC>( to return to the CLI.