276 User Guide Integrated Lights-Out
ADD_USER
The ADD_USER command is used to add a local user account. The
USER_NAME and USER_LOGIN parameters must not exist in the current user database. Use the MOD_USER command to change an existing user's information. For this command to parse correctly, the command must appear within a USER_INFO command block, and USER_INFO MODE must be set to write. The user must have the administrative privilege.
All of the attributes that pertain to the user are set using the following parameters.
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="loginname" PASSWORD="password"> <USER_INFO MODE="write">
<ADD_USER USER_NAME="User"
USER_LOGIN="username" PASSWORD="password"> <ADMIN_PRIV value ="No"/> <REMOTE_CONS_PRIV value ="Yes"/> <RESET_SERVER_PRIV value ="No"/> <VIRTUAL_MEDIA_PRIV value ="No"/> <CONFIG_ILO_PRIV value ="No"/>
</ADD_USER>
</USER_INFO> </LOGIN>
</RIBCL>
ADD_USER Parameters
USER_NAME is the actual name of the user. This parameter can be a combination of any printable characters up to a maximum length of 39 characters. This parameter is case sensitive and must never be blank.
USER_LOGIN is the name used to gain access to the respective iLO. This parameter can be a combination of any printable characters up to a maximum length of 39 characters. This parameter is case sensitive and must never be blank.
