HP Integrated Lights-Out manual Cpqlocfg

248 User Guide Integrated Lights-Out

•-F is the switch that gives the full path location and name of the RIBCL file that contains the actions to be performed on the board.

•-U and -P specify the user login name and password.

Be sure that the Lights-Out Configuration Utility is in a directory referenced by the PATH environment variable. Any log files generated are placed in the same directory as the Lights-Out Configuration Utility executable

The switches -L and -V might or might not be set depending on the IT administrator's preferences.

•-L is the switch that defines where the log file will be generated and what the file name will be. If this switch is omitted, a default log file with the DNS name or the IP address is created in the same directory used to launch

CPQLOCFG.

Do not use this switch if launching from Insight Manager 7 or Systems Insight Manager.

NOTE: The -L parameter cannot designate an output log file. A default log file named with the DNS name or the IP address is created in the same directory where CPQLOCFG is launched.

•-V is the optional switch that turns on the verbose message return. The resulting log file contains all commands sent to the Remote Insight board, all responses from the Remote Insight board, and any errors. By default, only errors and responses from GET commands are logged without this switch.

Refer to the "Remote Insight Command Language (on page 269)" section for information on the syntax of the XML data files. Sample XML scripts are available on the HP website (http://www.hp.com/servers/lights-out) in the Best Practices section.