Remote Insight Command Language 281

•User login name was not found.

•User does not have correct privilege for action. ADMIN_PRIV required.

GET_USER Return Messages

A possible GET_USER return message includes:

<RESPONSE

STATUS="0x0000"

MSG="No Errors"

/>

<GET_USER

USER_NAME="Admin User"

USER_LOGIN= "username" ADMIN_PRIV="N" REMOTE_CONS_PRIV="Y" RESET_SERVER_PRIV="N" VIRTUAL_MEDIA_PRIV="N" CONFIG_ILO_PRIV value ="No"

/>

MOD_USER

The MOD_USER command is used to modify an existing local user’s account. The USER_LOGIN parameter must exist in the current user database. For this command to parse correctly, the command must appear within a USER_INFO command block, and USER_INFO MODE must be set to write. The user must have the administrative privilege. A user without the administrative privilege can only modify their individual account password.

Example:

<RIBCL VERSION="2.0">

<LOGIN USER_LOGIN="adminname" PASSWORD="password"> <USER_INFO MODE="write">

<MOD_USER USER_LOGIN="loginname"> <USER_NAME value="username"/> <USER_LOGIN value="newloginname"/> <PASSWORD value="password"/> <ADMIN_PRIV value="No"/> <REMOTE_CONS_PRIV value="Yes"/>