Remote Insight Command Language 307
DIR_INFO
The DIR_INFO command can only appear within a LOGIN command block. When the command is parsed, it reads the local directory information database into memory and prepares to edit it. Only commands that are DIR_INFO type commands are valid inside the DIR_INFO command block. The DIR_INFO command generates a response that indicates to the host application whether the database was successfully read or not. If the database is open for writing by another application, then this call will fail.
Example:
<DIR_INFO MODE="read">
………DIR_INFO commands …… </DIR_INFO>
DIR_INFO Parameters
MODE is a specific string parameter with a maximum length of 10 characters that specifies what you intend to do with the information. Valid arguments are "read" and "write."
Write mode enables both reading and writing of directory information. Read mode prevents modification of directory information.
DIR_INFO Runtime Errors
None
GET_DIR_CONFIG
The GET_DIR_CONFIG command requests the respective iLO directory settings. For this command to parse correctly, the GET_DIR_CONFIG command must appear within a DIR_INFO command block, and DIR_INFO MODE can be set to read or write.
Example:
<RIBCL VERSION="2.0">