88 Chapter 6 Configuration
4. Under Notify me during these business hours, after Schedule name, select a schedule that
reflects the hours of operation for the media server.
5. If you must create or modify a schedule for the media server, click Manage schedule and configure a
schedule.
See “Creating schedules” on page171.
6. Click Save.
Adding a 5000/Axxess media server
To add a 5000/Axxess media server
1. In YourSite Explorer, click Media servers.
2. Click Add=>Mitel 5000/Axxess.
NOTE: To distinguish between the various types of media for management and reporting purposes,
you must give each media server a unique name when setting up your site.
3. After Name, type the name of the media server.
4. After Site, select the site where the media server resides.
5. After Computer name, select the computer where the server resides.
6. After Media server type, select the type of media server.
7. Specify the licenses to use for the media server.
For example, select Call Accounting if you are applying a Call Accounting license. If you are not
licensed for a product the check box for that product does not show. If you have no remaining
licenses, although the check box still shows, an error message indicates that all available licenses
have been used.
8. After IP/DNS address, specify the IP.DNS address of the media server.
9. After Password, type the password used to connect to the telephone system.
10. After Confirm password, type the password used to connect to the telephone system.
11. If the 5000/Axxess is connected to a CT Gateway, under Gateway settings, select This media
server belongs to a gateway and specify the Gateway ID.
12. Click Save.
13. Configure the location settings.
See “Configuring location settings for a 5000/Axxess” on page88.

Configuring location settings for a 5000/Axxess

To configure location settings for a 5000/Axxess
1. Click the Location tab.
2. After Country, select the country where the media server is located.
If you are setting up a node, select the country in which the node is located.
3. After Area, select the area code where the media server is located.
If you are setting up a node, select the area in which the node is located.
4. After Minimum digits to dial locally, type the minimum number of digits dialed for a local call in your
city.
5. After Maximum digits to dial locally, type the maximum number of digits dialed for a local call in your
city.
6. After Outbound dialing prefix, type the number you dial to access an outside line.
This information is required if you use a general business model and want to view when phone
extensions are active or inactive.
7. Configure the data summary options.
See “Configuring data summary options for a 5000/Axxess” on page89