Mitel Version 5.7 SP1 Table 19-1 3300 ICP Traffic Options Assignment form Option Value

Using Traffic Analysis 551
Table 19-1 3300 ICP Traffic Options Assignment form
Option Value
Time Slot Active Select Yes to start a traffic session at the time specified in Start
Time field and finish at the Stop Time field for each of up to six
different slots. The report is resumed the next day at the same time.
Select No to suspend the traffic report for the associated time slot.
The traffic report will not run until Yes is entered and the form
recommitted. Default is No. There can be no overlapping of
ACTIVE time slots. Select: Yes
Start Tim e
(-Hours, -Minutes)
Select the time the traffic report is to start running. Default is blank.
The start time must be assigned for active time slots; it can be blank
for inactive time slots. If the start time equals the stop time then the
time period is 24 hours. Select: 00:00
Stop Time
(-Hours, -Minutes)
Select the stop time for the report. If the session is to run for 24
hours, enter the same time as the start time. Default is Blank. The
stop time must be assigned for active time slots; it can be blank for
inactive time slots. If the start time equals the stop time then the
time period is 24 hours. Select: 24:00
Period Length Select the length of time(15, 30, or 60 minutes) that data is to be
collected for the session before a traffic report is formatted and
output. Default is 60 minutes. Select: 15
Usage Units Select the type of units the report will use. Default is Erlangs.
Select: Erlangs
Autoprint Select Yes to spool the traffic report to the printer assigned to this
function in the Application Logical Port Assignment form. Default is
No. We will be using the LPR1 Port 1754 to output traffic.
Select: Yes
Maximum Number of Traffic Files Enter the maximum number of traffic reports to be stored in disk.
Default is 10. Select: 10