Introduction
Remote Service
DEFINITY ECS’s
The number of T1 or E1 lines required to support the remote port network depends on the requirements of the remote port network. For example, with four T1/E1 lines, a maximum of 92 or 120 simultaneous voice and/or data connections can be made between the remote port network and the DEFINITY ECS. Four channels are reserved for signaling between the remote port network and the system.
Power
DEFINITY ECS can accept a variety of AC or DC power. The system can operate without requiring a power transformer in almost any part of the world.
During a power outage, individual cabinets (single or multicarrier) will continue to function for up to 15 seconds; the multicarrier cabinet will function for up to 10 minutes without power, depending on configuration. Optionally, an uninterruptible power supply can protect a DEFINITY ECS system from under or
Software
All DEFINITY ECS systems throughout the world use the same basic software. To provide this commonality while still accommodating wide variations in configurations and options, the system dynamically allocates internal memory storage. Memory is sized when the system is initialized, selecting the proper software parameters based on the hardware configuration.
In addition to the basic software, various optional packages can enhance the capabilities of the system. Some of the capabilities described in this document require optional software. See your account representative for more information. The basic software is a prerequisite for all the optional packages.