System Capacity Limits
46.Only 1 processor interface (PI) circuit pack is supported in Release 6vs and Release 6si configurations, therefore a total of 4 physical links (used for BX.25 or PRI) are available. PRI interface via the PI is not available in France, Germany, and Italy. PRI interface via the packet controller is used.
47.Other countries must use the PI when they have the Release 6vs configuration without packet bus capability.
48.The TN2185 BRI trunk circuit pack provides 8 ports. Each port (2B+D) provides 2 BRI trunks.
49.The following items detract from the total number of available “stations:”
Analog
Attendants
Modem pool conversion resources
TAAS port
Stations (digital, display, BRI, and so forth.)
Analog announcements
Analog external alarm port
Agent login IDs
ACD agents
50.All BRI stations can be display stations. Release 6vs can have up to 50 BRI stations if the unit is configured for packet interface.
51.The software limit for digital stations in Release 6vs is 400. Due to power limitations, 120 is the recommended limit.
52.Including extensions administered without associated hardware (Release 6si and Release 6r). The station capacity for Release 6vs is a software limit because of the physical capacity (10 port slots).
53.The station button capacity can support all stations equipped as 8410D digital sets with display. For example, a total of (292 x 2400) = 700.8K units. The table below shows approximate unit values for various station types. The term “default” means with no
8403B (default): 32
8403B (loaded with 3 CA): 152
8410B (default): 32
54.The following button features share a common resource in memory:
Call Forwarding, Call Forward Busy Don’t Answer, Send Extension Calls (SAC w/extension), Station Busy Indicators, Trunk Group Status, Hunt Group Status, PCOL GRoup Status, Data Module, Terminating Extension Group Status, Attendant Group Status/DXS, Remote Trunk Group Select.
55.For G3r, TN789 Radio COntroller Circuit Packs cannot be used in DS1 remoted EPNs.
