*JOINT PLASTICITY
7. Firstfield variable.
8. Second field variable.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greaterthan two):
1. Thirdfield variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the plastic behavior as a function of
temperature and other predefined field variables.
Data lines for TYPE=CLAY:
First line:
1. , undrained shear strength of the clay.
2. a, hardening parameter.
3. b, hardening parameter.
4. c, hardening parameter.
5. Temperature.
6. Firstfield variable.
7. Second field variable.
8. Thirdfield variable.
Subsequent lines (only needed if the DEPENDENCIES parameterhas a value greater than three):
1. Fourth field variable.
2. Etc.,up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the plastic behavior as a function of
temperature and other predefined field variables.
Data lines for TYPE=MEMBER:
First line:
1. , compressive capacity.
2. , tensile capacity.
3. , horizontal capacity.
4. , moment capacity.
5. Temperature.
6. Firstfield variable.
7. Second field variable.
8. Thirdfield variable.
10.3–2
ABAQUS Version 6.1 Module: ID:
Printed on: