3D Connexion Version 6.6

*PART

16.4 *PART: Begin a par t deﬁnition.

This option is used to begin a part deﬁnition. It must be used in conjunction with the *ASSEMBLY,*END

PART, a nd *INSTANCEoptions.

Products: ABAQUS/Standard ABAQUS/Explicit

Type: Model data

Level: Model

References:

•“Deﬁning an assembly,”Section 2.9.1 of the ABAQUS Analysis User ’sManual

•*END PART

Required parameter:

NAME

Set this parameter equal to a label that will be used to refer to the part.

There are no data lines associated with this option.

16.4–1

ABAQUS Version 6.1 Module: ID:

Printed on: