3D Connexion Version 6.6

*OUTPUT

15.3 *OUTPUT: Deﬁne output requests to the output database.

This option is used to write contact, element, energy, nodal, or diagnostic output t o the output database. In

an ABAQUS/Standard analysis it is also used to write modal or radiation outputto the output database. In

an ABAQUS/Explicit analysis it is also used to write increm entation output to the output database. The

*CONTACT OUTPUT, *ELEMENT OUTPUT, *ENERGY OUTPUT, *INCREMENTATION OUTPUT,

*MODAL OUTPUT,*NODE OUTPUT, and/or *RADIATION OUTPUT options can be used in conjunction

with this option.

Products: ABAQUS/Standard ABAQUS/Explicit

Type: History data

Level: Step

Using *OUTPUT in an ABAQUS/Standardanalysis

References:

•“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User ’sManual

•“ABAQUS/Standardoutput variable identiﬁers,” Section 4.2.1 of the ABAQUS Analysis User’s Manual

•“Overview of job diagnostics,” Section23.1 of the ABAQUS/CAE User ’sManual

•*CONTACT OUTPUT

•*ELEMENT OUTPUT

•*ENERGY OUTPUT

•*MODAL OUTPUT

•*NODE OUTPUT

•*RADIATIONOUTPUT

•*TIME POINTS

One of the following mutuallyexclusive parameters is required:

DIAGNOSTICS

Set DIAGNOSTICS=YES (default) to indicate that detailed diagnostic information should be

written to the output database. Set DIAGNOSTICS=NO to suppress the output.

FIELD

Include this parameter to indicate that the output requests used in conjunction w ith the *OUTPUT

option will be written to the output database as ﬁeld-type output.

15.3–1

ABAQUS Version 6.1 Module: ID:

Printed on: