*SELECT EIGENMODES
Data lines if the GENERATEparameter is omitted and DEFINITION=MODE NUMBERS:
First line:
1. Listof modes to be used.
Repeat this data line as often as necessary. Up to 16 entries are allowed per line.
Data lines if the GENERATEparameter is omitted and DEFINITION=FREQUENCY RANGE:
First line:
1. Lower boundary of the frequency range (in cycles/time).
2. Upperboundary of the frequency range (in cycles/time).
Repeat this data line as often as necessary.
Data lines if the GENERATEparameter is included:
First line:
1. First mode number.
2. Last mode number.
3. Incrementin mode numbers between modes. The default is 1.
Repeat this data line as often as necessary.
18.7–2
ABAQUS Version 6.1 Module: ID:
Printed on: