*UEL PROPERTY
20.1 *UEL PROPERTY: Defineproperty values to be used with a user element type.
This option is used to define the properties of a user element.
Product: ABAQUS/Standard
Type: Model data
Level: Part, Part instance, Model
References:
•“User-defined elements,” Section 26.15.1 of the ABAQUS Analysis User’sManual
•*USER ELEMENT
Required parameter:
ELSET
Set this parameter equal to the name of the element s et containing the user elements for which these
property values are being defined.
Optional parameters (relevant onlyfor direct-integration dynamic analysis with linear user
elements):
ALPHA
Set this parameter equal to the Rayleigh mass damping factor, .
BETA
Set this parameter equal to the Rayleigh stiffness damping factor, .
To define the properties of linear user elements:
There are no data lines required.
Data lines to define the properties of nonlinear userelements if the PROPERTIES and/or
I PROPERTIES parametersare used on the *USER ELEMENT option with a value of one or more:
First line:
1. Enter the values of the element propertie s. Enter all floating point values first, followed
immediately by the integer values.
Repeat this data line as often as necessary. Eight values per line are used for both real and integer
values.
20.1–1
ABAQUS Version 6.1 Module: ID:
Printed on: