*SUBSTRUCTURE MATRIX OUTPUT
Set OUTPUT FILE=USER DEFINED to write the results to a user-specified file in the
format of the *USER ELEMENT, LINEAR option (“User-defined elements,” Section26.15.1 of
the ABAQUS Analysis User’s Manual). The name of the file is specified using the FILE NAME
parameter.
Set OUTPUT FILE=ODB to write the data to the output database (.odb) file.
RECOVERY MATRIX
Set RECOVERY MATRIX=YES to write the substructure recovery matrix (only available if the
recovery matrix is requested with the *SUBSTRUCTURE GENERATE option). The default is
RECOVERY MATRIX=NO.
SLOAD
Set SLOAD=YES to write the substructure load case vectors. The default is SLOAD=NO.
STIFFNESS
Set STIFFNESS=YES to write the substructurestiffness matrix. Thedefault is STIFFNESS=NO.
There are no data lines associated with this option.
18.43–2
ABAQUS Version 6.1 Module: ID:
Printed on: